Description
The anti-robbery cables are used in service entrances replacing low voltage bundled copper cables in order to avoid energy robbery. A common way of energy robbery nowadays is using metallic claws, biting the phase and the neutral conductors, allowing the use of electricity without passing through the energy meter. However, the anti-robbery cable is so constructed that the use of the claws is not possible anymore. Its neutral conductor surrounding the phase like a wire armoring does not allow any contact with the central phase conductor without touching this concentric neutral conductor.
Description
Construction: soft annealed copper conductor, class 2 stranding, XLPE inner insulation, neutral conductor applied as an armoring of soft annealed copper wires and a XLPE outer insulation.
Identification of the Insulated Conductors:
The identification is made by the color of the insulation material, being:
- Single-phase conductor: black
- Two-phase conductors: black and red
- Three-phase conductors: black, red and white
Max conductor temperatures
90° at continuous service, 130° overloaded and 250° at short-circuit.
Caractéristiques
| Caractéristiques de construction | |
|---|---|
| Type de câble | Concentric |
| Nature de l'âme | Cuivre recuit nu |
| Type de conducteur | Circular, stranded, class 2 |
| Isolation | XLPE |
| Gaine extérieure | XLPE |
| Caractéristiques dimensionnelles | |
| Nominal insulation thickness | 1,0mm |
| Protective Covering Nominal Thickness | 1,2mm |
| Nombre de conducteurs | 3 |
| Diamètre du conducteur (mm) | 4,05mm |
| Section du conducteur | 10mm² |
| Diamètre externe nominal (mm) | 18,4mm |
| Masse approximative | 645kg/km |
| Caractéristiques électriques | |
| Tension de service nominale Uo/U | 0,6 / 1 kV |
| Résistance linéique en courant continu à 20° C | 1,83Ohm/km |
