Description
Standards
International : EN 187000; IEC 60794Description
This cable is used for Access, Distribution, City Network and FTTx applications.It is designed to be installed by pulling or blowing in ducts.
Characteristics & Applications
- High blowing distance due to the excellent friction properties of the outer sheath
- Central strength member reinforcement
- High pulling strength
- All dielectric design
- Waterproof dry core structure
Fibre Type
The cable is available with diffrent fibre types.
Construction
- Jelly filled tubes containing coloured fibres
- Central FRP strength member
- Glass yarns armoring
- Very Low friction outer sheath
Characteristics
| Construction characteristics | |
|---|---|
| Fiber optic type | SM |
| Outer sheath | HDPE |
| Armour type | Glass yarns |
| Construction type | Loose Tube |
| Strength member | FRP |
| Metal free | Yes |
| Dimensional characteristics | |
| Number of optical fibres | 48 |
| Number of tubes | 4 |
| Nominal outer diameter | 7.9mm |
| Approximate weight | 53kg/km |
| Mechanical characteristics | |
| Maximum admissible traction load | 280daN |
| Maximum tensile load during service | 150.0daN |
| Crush resistance (IEC 60794-1-E3) | 300N/cm |
| Usage characteristics | |
| Installation type | Outdoor - Duct |
| Ambient installation temperature, range | 0 .. 40°C |
| Operating temperature, range | -30 .. 70°C |
| Storage temperature, range | -40 .. 70°C |
| Bending factor when laying | 20(xD) |
Docs and info
Selling information
Standard Marking
Nexans - MG - SPxxxx - FIBRE OPTIC CABLE - XX*YY - FB - TN - metric
XX = Fibre Count
YY = Fibre Type
FB = Produced in Frameries, Belgium
TN = Traceability Number
