Description
Standards
International : IEC 60502National : XP C 32-321
Description
Application
U-1000 AR2V cables can be used in all low voltage power installations. Multiconductors cables are adapted to remote control and telecontrol installations.
In case of high ambiant temperature, use correction coefficient.
Installation
These cables can be fixed on cable trays, within conduits or fixed to walls. They also can be buried directly with extra mechanical protection.
Cross sections 1,5 - 2,5 and 4 mm² have to be of class 2 flexiblility, if the cable is connected to equipment subject to vibration.
Characteristics
| Construction characteristics | |
|---|---|
| Conductor material | Aluminum |
| Conductor flexibility | Stranded class 2 |
| Insulation | XLPE (chemical) |
| Outer sheath | PVC |
| Sheath colour | Black |
| With smaller neutral conductor | No |
| Dimensional characteristics | |
| Conductor cross-section | 35mm² |
| Number of cores | 3 |
| Maximum outer diameter | 26.0mm |
| Approximate weight | 735kg/km |
| Electrical characteristics | |
| Rated Voltage Uo/U (Um) | 0.6/1 kV |
| Voltage drop, single phase | 1.6V/A.km |
| Permissible current rating in open air | 125A |
| Permissible current rating when buried | 133A |
| Mechanical characteristics | |
| Mechanical resistance to impacts | Good |
| Cable flexibility | Rigid |
| Usage characteristics | |
| Max. conductor temperature in service | 85°C |
| Short-circuit max. conductor temperature | 250°C |
| Operating temperature, range | -10 .. 60°C |
| Length | 1000m |
| Packaging | Drum |
| Flame retardant | C2, NF C 32-070 |
| Weather resistance | Very good |
| Chemical resistance | Accidental |
| Bending factor when laying | 6(xD) |
